Altusen KM0432 Bedienungsanleitung PDF herunterladen (Seite 44)

KM0832 User Manual

Setting the IP Address

The first time you access the KM0832 you should assign an IP address that is

appropriate for your network. There are three methods that you can follow to

do this: 1) set your computer's network adapter to the same subnet as the

KM0832, log in, and then assign an IP address; 2) use the ATEN IP Installer to

assign an IP address; or, 3) log in to the OSD and set the IP address.

Note: The default IP address of the KM0832 is 192.168.0.10.

On the Same Network Segment

1. Set your computer so that it is on the same subnet as the KM0832. Your

computer's IP address should be 192.168.0.XXX, where XXX represents

any number from 1–253, except 10. (See Factory Default Settings,

page 106, for complete default network settings.)

2. If you use a proxy server to access the LAN you should disable it in

Microsoft

Internet Explorer.

3. In the URL bar of a web browser, enter 192.168.0.10. The KM0832 Login

screen appears.

4. Assign an IP address for the KM0832 that is appropriate for the network

segment on which it resides. (See Network Configuration on p. 36).

5. After logging out, reset your computer's network settings back to their

original values.

Using the IP Installer

Go to the Altusen support site and select the webpage that is specific for the

KM0832. From there you can download the IP Installer along with instructions

on how to use it to assign an IP address to the KM0832.

From the OSD

1. From the console, open the OSD. Navigate to the IP Address Setting

screen (see SET NETWORK, page 91).

2. Follow the instructions in this user manual to manually set the IP address

or to view the current settings. (If DHCP is enabled, you will not be able to

view the IP address.)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 137 138

Keine Kommentare

Altusen KM0432 Bedienungsanleitung Seite 44