Altusen KN2116a Bedienungsanleitung PDF herunterladen (Seite 29)

Chapter 1. Introduction

No. Component Description

1 Power Socket The power cable(s) plugs in here.

Note: For the KN2124v, KN2140v, KN4124v and the

KN4140v units, the top power socket corresponds to the left

power switch, and the bottom power socket corresponds to

the right power switch.

2 Power Switch This standard slide switch powers the unit on and off.

3 Secondary LAN

Port

The cable that connects the unit to the backup network

interface (10/100/1000 Mbps) plugs in here.

4 PON Port This connector is provided for a Power over the Net™

(PON) unit which allows servers attached to the KVM Over

the NET

switch to be booted remotely over the net.

See Single Stage Installation, page 21, step 6 for

installation details. Contact your dealer for more information

regarding PON units.

5 Grounding

Terminal

The wire used to ground the unit connects here.

6 Primary LAN

Port

The cable that connects the unit to the primary network

interface (10/100/1000 Mbps) plugs in here.

7 Modem Port For dial in connection should the unit be unavailable over

the network. See Single Stage Installation, page 21, step 7

for installation details.

8 Local Console

Port(s)

The unit can be accessed via a local console as well as over

the Net. The local console devices (keyboard, monitor and

mouse), plug in here. Any combination of USB and PS/2

keyboards and mice can be used.

Note: For the KN2124v, KN2140v, KN4124v and the

KN4140v units, use the 5-in-1 cable supplied with the

package to connect your console devices to the unit.

9 KVM Ports The Cat 5e cables that link the unit to the KVM Adapter

Cables (which connect to the servers), plug in here.

kn2124v-4132.book Page 13 Thursday, June 25, 2009 11:27 AM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 240 241

Keine Kommentare

Altusen KN2116a Bedienungsanleitung Seite 29